The commonly used materials for sheet metal processing parts are cold rolled plate (SPCC), hot rolled plate (SPHC), galvanized plate (SECC, SGCC), copper (CU) brass, red copper, beryllium copper, aluminum plate (6061, 5052) , 1010, 1060, 6063, duralumin, etc.), aluminum profiles, stainless steel (mirror, brushed, matte), depending on the role of the product, the choice of materials is different, and generally need to be considered from the product's use and cost. The following editor introduces the selection of materials for sheet metal processing parts in detail.

1. Cold-rolled sheet SPCC, mainly used for electroplating and baking varnish parts, low cost, easy to shape, material thickness ≤ 3.2mm.

2. Hot-rolled sheet SHCC, material T≥3.0mm, also uses electroplating, baking varnish parts, low cost, but difficult to form, mainly flat parts.

3. Galvanized sheet SECC, SGCC. SECC electrolytic board is divided into N material and P material. N material is mainly used for surface treatment and high cost. P material is used for sprayed parts.

4. Copper; mainly uses conductive material, and its surface treatment is nickel plating, chrome plating, or no treatment, which is costly.

5. Aluminum plate; generally use surface chromate (J11-A), oxidation (conductive oxidation, chemical oxidation), high cost, silver plating, nickel plating.

6. Aluminum profiles; materials with complex cross-section structures are widely used in various sub-boxes. The surface treatment is the same as the aluminum plate.

7. Stainless steel; mainly used without any surface treatment, high cost.